Tips for Maintaining Luxury Bathroom and Kitchen Fittings
Posted on Jun 23, 2022
A spotless, gleaming space is unquestionably appealing. However, if your luxury bathroom and kitchen fittings are not adequately cleaned, it will disturb the senses because it is the most used area of your house. Keeping your space clean gives you a good feeling, and your bathroom will appear more extravagant.
Here are some simple steps to keep your luxurious bathroom fittings and kitchen faucets for almost a lifetime.
Clean your Premium Sanitary Ware
To keep your sanitary ware looking posh, make sure to keep bacteria and mildew at bay. It is essential to clean the areas near the sanitary wares once a week. Hard water is the primary cause of dirty and unpleasant sanitary ware. It causes the water to hold sand-like particles accumulated on the surface of the sanitary ware, resulting in a thick layer of dirt at the base of the toilet seat and sink.
Tips for Cleaning your Magnificent Sanitary Ware:
-Install a water filter to control the hardness level.
-Ventilate the bathroom to allow steam and water drops to evaporate before staining the sanitary ware or tiles.
-Avoid allowing the paint to come into contact with the sanitary ware because it has a corrosive effect that will damage its shiny surface.
-Use a professional cleaner to remove the stubborn dirt stains.
-Strong chemicals, such as chlorine, should be avoided because they will deteriorate the ceramic of the sanitary ware, destroying its pleasant shine.
Maintain your Premium Bathroom and Kitchen Faucets
Premium kitchen faucets require much care because it is delicate. However, we recommend you carefully read the instruction manual with the faucets. As a general cleaning procedure, you can always use a mild cleanser. Clean and scrub the faucets with a mildly wet cloth dipped in the cleanser. To avoid stains, clean and wash the faucets with mild soap and then dry with a microfiber towel or soft cloth.
Showerheads
A luxury shower head can transform your bathroom into a luxurious home spa, but cleaning the showerhead is frequently forgotten. Follow the steps below to keep your showerhead clean and elegant.
Rinse: After each use, thoroughly rinse and wipe down your spring shower. Fill a small sealed plastic bag halfway with vinegar and secure it with a rubber band or hair tie to your faucet. This will remove the dirt and mold from the surfaces.
Harsh chemicals should be avoided: Although hard chemicals should be avoided: However, the results of hard chemicals are faster and brighter than those of soft chemicals but they also remove the sealant.
Keep the shower door open: Open the shower door after showering. This will aid in dispersing any remaining moisture in the shower.
Once in a While, you Must:-
-Spray your walls with diluted cleaner or a vinegar-water solution containing a few drops of tea tree oil.
-Clean the tiles and shower walls with a sponge.
-Clean the sealant weekly with a soft scrub brush and elbow grease. To keep the shower safe, avoid using harsh chemicals.
-Soap scum should be removed from shower doors. A baking soda and vinegar paste are suggested. After 20 mins to an hour of application, scrub with a microfiber cloth.
Conclusion
By following these steps, you can be diligent in maintaining the condition of your premium kitchen and bathroom fittings for a long time.
